 |
| |
Safe-T-Ramp Family
Safe-T-Ramp for pickups, flatbed & box trucks, and trailers
Safe-T-Ramps for box vans
Safe-T-Van van ramps for delivery, conversion, or sprinter/freightliner vans
Safe-T-Quad ramps for ATVs and construction gear
Safe-T-Tow adapter to tow a trailer and use Safe-T-Ramp
Product Specifications
-
Safe-T-Ramp Family Applications:
- Loading, Moving & Delivery
- 3 and 4 Wheeler ATV's
- Motorcycles & Bikes
- Mowers, Tillers, Tractors
- Snowmobiles
- Wheelchairs & Scooters
- Go-carts
- Golf Carts
- Utility Vehicles
- Handcarts & Dolies Construction Equipment
- And Much More!
Safe-T-Ramp Features for Pickups:
No more makeshift, unforgiving, narrow ramps!
- Three Models (53" wide, 6',7' and 8' lengths) fit nearly all Pickups
- Welded steel construction, heavy duty 1200 pound load capacity
- Patented design uses your 2 inch (Class III or IV) receiver hitch. One pin attachment
- No truck modifications. No tailgate attachment or loading. No setup or disassembly in town or in the field.
- Tailgate remains down, for additional Bed Length
- Installation initially in less than 15 minutes, by two persons. Fast removal and reinstallation.
- 7' and 8' models have an air cylinder lift assist
- Hinge designed for arch effect so that mower decks, etc. do not drag
- Tough, durable, maintenance-free electrostatic coating
- Expanded metal deck reduces weight and wind resistance
- Every unit is inspected for quality, and tested to the maximum load capacity
- Load to ground or elevated level, or transfer vehicle-to-vehicle
- Stows into a compact 4 inch wide package, outside the cargo bed.
- Latches with 2 Lynch pins or padlocks into a stable and secure upright position for transit. Ramp can be locked to your receiver hitch.
find a dealer near you -
back to top -
order now
A7Q - Safe-T-Quad Features for Pickups:
Take your ATVs and 4 wheel equipment anywhere in your pickup!
- Same safe, secure patented hitch mount system and features as other Safe-T-Ramps
- Two 16" wide "ladder" panels, 19" separation, fit all ATV's
- 7' length fits nearly all pickups
- Tough, light-weight aluminum construction
- High-traction serrated rod rungs
find a dealer near you -
back to top -
order now
A9 - 9' Aluminum Safe-T-Ramp for Pickups or Box Trucks:
Designed for motorcycles but versatile enough for most wheeled equipment!
- Same safe, secure patented hitch mount system and features as other Safe-T-Ramps
- One 9' long 39" wide panel
- Included 12 angle built into center hinge
- Heavy-duty, light weight Aluminum construction
- High-traction serrated rod rung load surface
A7NP Aluminum Narrow Side Entry Panel Ramps (Pair) 7' x 12" panels:
The A7NP consists of a heavy duty pair of individually
mounted 7' long 12" wide aluminum folding panel ramps. These ramps can
be mounted to the inside step of a cargo van to allow for side loading
or they can be hard mounted for use on trailers or flatbeds. The
individual mounting capability allows you to space them according to
your specific application. They are great for ride on spreaders,
cleaning equipment, pressure washers, mobility equipment, and much much
more.
A7V - Aluminum Full Surface Van Ramp for Delivery Vans:
Load your delivery vans or other equipment into the back of your van!
- Tough, light-weight Aluminum loading ramp
- Aluminum expanded metal surface
- Mounts easily to the floor of the van
- 39" wide load surface
- 7' length makes slope easy for most equipment, cycles, hard trucks, etc
find a dealer near you -
back to top -
order now
Safe-T-Ramp Features for Trailer & Trucks:
ALL Safe-T-Ramps, including Safe-T-Quad, can be permanently mounted.
- Bolt or weld ramp to your trailer, flatbed or box truck, or structure
- Five Models : 53" width, 4', 6', and 8' lengths, and 38" wide by 10' ramp (can mount side-by-side for 6' wide by 10' ramp)
- Same operational features as Safe-T-Ramp
- Ramps can be used in combinations for special applications
find a dealer near you -
back to top -
order now
Safe-T-Ramp for Box Vans:
The R10T is a 10' long by 36" wide heavy duty loading ramp with a weight load rating of 1200lbs. These ramps were specifically designed to fit box trucks and flatbeds. The R10T is a safe and economical alternative to expensive and cumbersome lift gates. The R10T is constructed with an included 8 degree angle in the hinge to help with mowers that have a low belly clearance.
Typical applications for box trucks would be to mount two of the R10T's side by side to provide a 10' long x 6' wide full loading surface that is easy to open and close and provides a combined weight load in excess of 2000lbs.
These ramps are perfect in pairs for larger lawn and garden tractors and equipment equipment or individually for motorcycles and for moving companies.
find a dealer near you -
back to top -
order now
Safe-T-Tow VERSATILITY:
Use the Safe-T-Ramp and tow a trailer with the Safe-T-Tow adapter.
In this application, the tailgate is removed (a simple operation) so that the Ball Hitch remains close to the truck frame, shown below (using a 3/4" marine plywood sheet in the truck bed to bridge the gap due to removal of the tailgate).
find a dealer near you -
back to top -
order now
Patented Safe-T-Ramp Specifications
|
Model R7W |
Model R8W |
Model A7Q |
Model A9 |
Model R10T |
|
Width |
53" |
53" |
2 - 16" Panels |
39" |
36" |
|
Length |
7' |
8' |
7' |
9' |
10' |
|
Folded Height** |
37" |
4' |
43" |
54" |
60" |
|
Folded Depth |
4" |
4" |
4" |
4" |
4" |
|
** above truck or trailer bed
|
find a dealer near you -
back to top -
order now
|
|
|
|
